Product Description
Brand new Hifonics HFI1500D 1,500 watt RMS mono block amplifier with new retro "HF" logo and new designed heat sink for improved heat dissipation Features New Hifonics HFI1500D HFi Series 1500W Single Channel Monoblock Class D Car Amplifier RMS Power at 4 ohms: 500 watts x 1 chan. RMS Power at 2 ohms: 1000 watts x 1 chan. RMS Power at 1 ohms: 1500 watts x 1 chan. Maximum Power Output: 1500 watts Blue military grade PCB board Pulse Width Modulated MOSFET power supply HFR-3 remote bass level control included Adjustable Bass Boost (0 to +10 dB bass boost at 45 Hz) Blue illuminated retro Hifonics "HF" logo Mono Channel Preamp RCA Outputs RCA Inputs 4-Way System Protection Circuitry for Maximum amp Protection Dual 12 Gauge Speaker Terminals Advance Heat Sink Design for Maximum Heat Dissipation Silver nickel-plated RCA level inputs Silver nickel-plated screw terminals Adjustable Input sensitivity level: 200mV-6V Adjustable low-pass filter (30-250 Hz, 24 dB/octave) Subsonic filter (15-35 Hz) Damping factor: >200 Frequency response: 15-250 Hz Dimensions: 14-5/8" L x 8-13/16" W" x 2-7/16"H Power and Ground Inputs: 4 Gauge
Product Details
- Amazon Sales Rank: #4963 in Car Audio or Theater
- Brand: Hifonics
Features
- New Hifonics HFI1500D HFi Series 1500W Single Channel Monoblock Class D Car Amplifier
- RMS Power at 4 ohms: 500 watts x 1 chan.
- RMS Power at 2 ohms: 1000 watts x 1 chan.
- RMS Power at 1 ohms: 1500 watts x 1 chan.
- Maximum Power Output: 1500 watts
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
By Plumps
This company has the best customer service I have ever had.
I hooked up a Pioneer TS-W3002D4 12 In. Champion Series PRO Subwoofer into the Atrend E12Sv B Box Series 12-Inch Single Vented Subwoofer Enclosure, and I wired the subwoofer for 2ohms. After I hooked everything up and tested the lines, I was getting barely any output from the subwoofer. I was frustrated because I couldn't see where the problem was coming from, and I just ended up thinking my power wiring was insufficient or the amp was bad.
So, I finally called MAXXSONICS, the company that makes this amp. The phone didn't even ring once and a HUMAN picked up and said "hello". Past that, I asked for the technical support department, and the dude said "I can help you with that." Seriously, how crazy is that. One ring, person picks up, and he can help me with anything I need. That dudes name was Armando, and Armando is a sauce boss. He stayed on the line with me for at least 20-30 minutes, fixed my problem, and even had me play music while he listened over the phone to help me set my EQ settings right. I would have paid for service like that.
Anyway, I had a Clarion CX501 head-unit, and he said my levels weren't right for the voltage output from the head-units RCAs. So, just for the off chance you have the same subwoofer, box, and head unit (as Amazon does recommend this stuff together) here are the settings that made my hatchback rattle:
The settings are based on a clock face:
Level: 1:30
Bass: 1:30
Subsonic: 1
Low: 12
If you have any problems with this beast, call: 847-540-7700 and get Armando's extension: 127. That dude will hook you up. Lastly, that Atrend E12Sv ported box seems like a good idea, but do yourself a favor and get a sealed box if you get the pioneer champion speaker. The port-noise will fart all over anything but rap music.
1 of 1 people found the following review helpful.
By Stefan
You will have a hard time beating this unit for the price. Installation is straight forward and so is tuning. gives good bass, doesnt get hot and I havent blown any fuses. I would recomend it to anyone whether your on a budget or not.
1 of 1 people found the following review helpful.
By Connor
If your amp is shutting off Its because your running at at the wrong ohms... Trust me it happend to me Its not the amp
No comments:
Post a Comment